Athena Industries

A part of group Athena

Home / Products

Products

Metal Parts

Anti rotation washers

These washers, blanked or laser-cut, support a moving part but must not be dragged into rotating with it.

Pneumatics and Pressure Regulators | Steel coil | Blanking Equipment

Axial washers for thrust bearing AS/CP

Axial washers are rings obtained by blanking from ball-bearing steel. Their main use is as a raceway for ball bearings.

Pneumatics and Pressure Regulators | Steel coil | Blanking Equipment

Brackets, U-Bolts and Flanges

Brackets, U-bolts and flanges are components used to support, hold or fix mechanical parts, tubes, bushings, cables and the like in predetermined places.

Pneumatics and Pressure Regulators | Steel coil | Blanking Equipment

Convex washers for differential satellite gears

Convex or spherical washers are shims with a curved surface. They enable moving wheels to be properly coupled when they are not placed in a straight line.

Motorcycle and Engines | Steel coil | Blanking Equipment

Covers

Obtained by blanking or laser-cut. Used to close openings on various types of components and allow access inside.

Pneumatics and Pressure Regulators | Aluminum coil | Blanking Equipment

Disc Springs

These are rings, made by blanking, whose surface is then sloped to obtain a truncated cone shape.

Pneumatics and Pressure Regulators | Blanking Equipment

Flat washers with lubricating grooves

These are flat or spherical washers with on one or both sides grooves of varying form and size, whose function is to hold or channel and, sometimes, extract a fluid.

Pneumatics and Pressure Regulators | Steel coil | Vertical and horizontal CNC work centres and turning centres

Orbital Engine Collectors and Yokes

The valve plate for hydraulic orbital motors is a metal plate, produced by blanking, with holes to allow oil to pass through under pressure.

Agricultural and Off-Highway Machinery | Steel coil | Blanking Equipment

Phonic Wheels

Our phonic wheels comprise a circular crown with blanked slots. They can be flat or have bent parts, be flared or have various solutions so they fit easily to the rotating hub whose movement is to be controlled.

Motorcycle and Engines | Steel coil

Spacers, Washers, Locking Washers

Spacer is the name usually given to washers over a millimetre thick. Mostly made of iron, then galvanised, they can also be made of hardened steel and can have special finishings.

Pneumatics and Pressure Regulators | Steel coil | Blanking Equipment


Gaskets

Hydraulic gaskets

Hydraulic seals are mostly made of oil-resistant rubber. Their function is to guarantee the sealing of hydraulic valves, engines and pumps and they are often subject to high pressure.

Power Transmission and Drivetrain | Asbestos Free Materials | Waterjet and mill cutter systems

Protective flaps

Protective flaps are made-to-measure for clients who need to ensure protection on moving machinery.

Agricultural and Off-Highway Machinery | Rubber | Waterjet and mill cutter systems

Transmission gaskets

Drive transmission requires very strong sealing and consequently the materials and workmanship must be of the highest quality.

Pneumatics and Pressure Regulators | Paper


Magnetic and breather plugs, sight glasses

Breather plugs

Oil breather plugs are accessories for transmission of power. They monitor the internal pressure of oil-bath lubrication, avoiding risks of excess or insufficient pressure that might cause malfunctioning or break the sealing washers.

Power Transmission and Drivetrain | Brass Bars | Automatic and CNC lathes with bar feeder

Level sight glasses

Level sight glasses indicate the level of liquid contained within a tank. Their main application is to indicate the oil level in oil-bath lubrication of gears.

Pneumatics and Pressure Regulators | Alluminum alloy bars | Automatic and CNC lathes with bar feeder

Magnetic plugs

Magnetic plugs used as oil drain plugs make excellent filters. While the device is functioning they attract and capture metal debris present in the circuit, deriving, for example, from gear or engine wear.

Motorcycle and Engines | | Automatic and CNC lathes with bar feeder

Oil dipstick plugs

Oil dipstick plugs monitor the oil level inside a gearbox. Instead of an ordinary plug a breather plug may be fitted.

Power Transmission and Drivetrain | Alluminum alloy bars | Industrial automation of assembly


Rubber Elements

Boots and Bellows

Ideal for protecting components with axial or other types of movement. They guarantee total protection without limiting movement.

Motorcycle and Engines | | Injection and compression moulding presses for rubber


Diaphragms

Sealing caps

Designed for static seal of holes. Standard material is normally NBR, but special materials like FKM or ACM can also be used

Pneumatics and Pressure Regulators | | Injection and compression moulding presses for rubber


Valves

One-Way valves

One-way valve, known as check valve, is a part that allows a unique direction of the flux.

Pneumatics and Pressure Regulators | Automatic and CNC lathes with bar feeder


Dampers

Bell-shape Vibration Dampers

Special anti-vibration supports. Used wherever it is essential for proper functioning of large plants and machinery to reduce vibrations.

Electro Mechanics and Professional Appliances | Steel coil | Injection and compression moulding presses for rubber

Cylindrical Vibration Dampers

Ideal whenever it is essential for proper functioning of plants and machinery to reduce vibrations.

Hydraulics and Pumps | Steel rod | Laser cutting equipments


Washers and Sealing Solutions

Anti-extrusion rings

Anti-Extrusion rings are generally used with O-rings to prevent extrusion.

Hydraulics and Pumps | | Blanking Equipment

Bonded seals

Bonded seals are made of two bonded rings. Externally, a metal washer with rectangular cross-section, internally, a trapezoidal vulcanised elastomer ring. The metal ring’s main function is to resist high pressures.

Pneumatics and Pressure Regulators | Steel coil | Injection and compression moulding presses for rubber

Metal sealing washers

Sealing washers are circular seals with rectangular cross-section. They are used to ensure seals on hydraulic couplings where pressure is not high.

Pneumatics and Pressure Regulators | Steel coil | Blanking Equipment

O-Rings

O-Rings are circular seals with round cross-section, vulcanised when moulded, and they are the easiest, cheapest solution to problems of fluid or gas leaks.

Hydraulics and Pumps | | Injection and compression moulding presses for rubber


Building Quality

Design, production, consultancy and assistance. Our objective is continually higher quality. To give you products that help you to be even more competitive. And deliver services that are even more simple, rapid and accurate.

Welcome to Athena Industries world

Contact us